EBMX X9000 V3 Controller for Talaria Sting

Important: the harness in this kit is not the one in the photo — it is matched to the Talaria Sting / MX4 / MX5.

The EBMX X9000 V3 replaces the stock controller in the Talaria and opens the bike up to power the factory unit was never going to deliver. Headroom to 50 kW, EBMX's own VESC firmware, and tuning of throttle, regen and power levels from your phone.

What it fits

• Bike: Talaria Sting, MX4, MX5 (dedicated harness)
• Stock Talaria motor: yes
• EBMX motors: XLB, XUB and XTA series
• Other motors: KO Motors, QS138, QS165, Sotion, Eride, Rerode — maps for over 30 motors loaded at the factory
• Sensors: Hall and encoder, with no harness modification

Riding a Talaria XXX? You need the version with the XXX harness. There are also variants for the Sur-Ron Light Bee, Ultra Bee and E-Ride Pro SS.

Specifications

• Peak power: 50 kW
• Phase current: 1000 A, 1600 A in boost mode
• Transistors: 30 × Infineon 12 V MOSFETs
• Board: multi-layer PCB with CNC-milled copper busbars
• Inputs/outputs: 68
• Firmware: EBMX's own VESC build with FOC
• Updates: OTA through the XSeries app

What it actually changes in the riding

• 6 configurable power levels across Race and Street modes
• Built-in IMU with wheelie assist — launch control, anti-loop or stunt mode
• EBMX E-Clutch and regen adjustment in a graphical interface
• "Load & Go" battery profiles — over 15 ready presets
• Dual Hall throttle — two ADC inputs with signal-divergence monitoring

Before you buy — what to know

• Check which Talaria you have. The Sting, MX4 and MX5 take this harness; the XXX and XXX Pro need a different one. Not sure? Send us a photo of the connector and we'll check before shipping.
• The battery is usually the first limit, not the controller. Stock cells won't give up the current the highest settings ask for.
• The drive — at stronger settings the factory belt starts skipping. The alternative: a Warp Drive chain conversion.

What usually goes with it

• Rfloxa Hawk 31 Max fork — fits the Talaria MX3 / MX4 / XXX / XXX Pro
• Rear shock cover — fits all Talaria Sting models
• All parts for the Talaria Sting / MX3 / MX4 / MX5 and the EBMX collection

The controller is ready for the upcoming EBMX modules — Track Module and DC-DC.

Shipping →